Wish to fit more performance from your Ma k Pro? As our resident Geek’s Geek would say, then get an SSD, you putz! Incorporating an SSD could make your Mac b t quicker, copy files in the blink of a optical attention, making the device more responsive when multitasking.
For this how-to, we replaced the hard drive on a 15-inch Ma k Pro (non-Retina) from 2012 having a 480GB Mercury Extreme Pro 6G SSD from OWC, which costs $579. That actually works down to about $1.21 per GB. By comparison, you $800, which is $1.56 per GB if you bought the 512GB SSD from Apple’s site, that would run.
Luckily, it is fairly easy to displace the hard disk. Listed here is how.
Everything You’ll Require
- SSD (demonstrably).
- mSATA enclosure or adapter. We used the Seagate Thunderbolt Adapter ($99), you also can utilize the Seagate USB 3.0/2.0 because it had been the fastest connection, but Upgrade Cable, which costs just $19.99. There are also lots of other SATA enclosures in the marketplace.
- A tiny Phillips screwdriver
- Torx T6 screwdriver – OWC provides one utilizing the SSD, which we think is a nice touch.
Cloning Your Hard Disk
The first rung on the ladder is to clone your Mac’s hard drive onto the SSD. Because of this, a utility can be used by you such as Carbon Copy Cloner, but we are going to show you how exactly to do so with Apple’s very own Disk Utility program.
1. Link the SSD to the Mac using the mSATA enclosure or adapter.
2. Open the Disk Utility within the Applications folder.
3. Click on the SSD symbol, and ch se the Partition tab. Under where it says Partition Layout, select “1 Partition.” At the bottom regarding the screen is a box labeled “choices. ” Click on that package, as well as in the screen that opens, select “GUID Partition dining Table.”
4. Go through the First Aid tab, and select Verify Disk Permissions. After that procedure has completed, ch se Repair Disk Permissions. Once that is done, pick Verify Disk, then fix Disk.
5. Shutdown the Mac, and restart it holding then down the Option key. Ch se the choice to start to the Recovery Disk.
6. Select the choice to Reinstall Mac OS X. Select the SSD as the location disk. This method may take upwards of thirty minutes.
7. Copy your files from the original drive that is hard. Following the OS has installed, the energy shall ask you if you’d like to restore files from another disk. Ch se the initial drive that is hard. Dependent on exactly how files that are many have, this technique could take a moment, t .
Setting up the SSD
Next, you’ve got to split open your noteb k. Now comes the enjoyable part.
1. Flip your Mac over, and find the 10 screw holes.
2. Eliminate the screws utilizing the Phillips’ screwdriver. Note We recommend placing the screws in a small bowl or something compared to that effect and so the screws don’t go lacking. Yeah eHarmony how does work, they are scattered all over in this photo; do even as we state, not as we do.
3. Pry the underside off of your Ma k Pro. It will be removed fairly easily, without any force that is undue.
4. Find the hard disk drive. It’s held set up by way of a little little bit of synthetic. Take away the screws holding the synthetic piece set up.
5. Next, carefully raise the drive that is hard associated with the chassis, and eliminate the ribbon connecting it to your noteb k.
6. Regarding the four sides of this drive that is hard four little metal articles (visible in the picture above). Unscrew the posts using the Torx screwdriver. Then, screw the posts to the SSD.
7. Connect the mSATA ribbon to the SSD, and put it back the noteb k. Reattach the synthetic piece holding the drive in place, then screw the underside straight back on.
8. Turn the noteb k straight back on. Open System Preferences, then Business Disk. Select the SSD ( it should be the only one detailed), and restart your noteb k. You are all done!